PERMALIGN EDGE CUTTING HEAD CALIBRATION

5 PART MAINTENANCE TRAINING VIDEO SERIES

Learn the Proper Alignment and Calibration Method for the Permalign Edge 5-Axis Cutting Head

PERMALIGN EDGE CUTTING HEAD CALIBRATION

PART 1 OF 5: ALIGNING THE C-AXIS

Your Cutting Head must be aligned and calibrated properly to ensure accuracy and repeatability for every cut. This 5-Part series details the instruments required for proper alignment and the steps to achieve calibration.

Part 1 of 5, Aligning the C-Axis:

  • Setting up the Alignment Tools
  • Entering Administrative Mode
  • Aligning the C-Axis, sweeping on the A and C Motor Bracket

PERMALIGN EDGE CUTTING HEAD CALIBRATION

PART 2 OF 5: ALIGNING THE DIAL INDICATORS

Your Cutting Head must be aligned and calibrated properly to ensure accuracy and repeatability for every cut. This 5-Part series details the instruments required for proper alignment and the steps to achieve calibration.

Part 2 of 5, Aligning the Dial Indicators:

  • Trim the C-Axis in Drive Services
  • Install and align the Indicators to the Cylinder
  • Configure the Jog Settings

PERMALIGN EDGE CUTTING HEAD CALIBRATION

PART 3 OF 5: ALIGNING THE A-AXIS MOTOR

Your Cutting Head must be aligned and calibrated properly to ensure accuracy and repeatability for every cut. This 5-Part series details the instruments required for proper alignment and the steps to achieve calibration.

Part 3 of 5, Aligning the A-Axis Motor:

  • Properly read the Dial Indicators for adjustment of the A-Axis
  • Adjust the A-Axis using the Jet Edge HMI
  • Trim the A-Axis in Drive Services.

PERMALIGN EDGE CUTTING HEAD CALIBRATION

PART 4 OF 5: MECHANICAL ADJUSTMENT OF THE A-AXIS

Your Cutting Head must be aligned and calibrated properly to ensure accuracy and repeatability for every cut. This 5-Part series details the instruments required for proper alignment and the steps to achieve calibration.

Part 4 of 5, Mechanical Adjustment of the A-Axis:

  • Mechanically adjust the A-axis using wrenches
  • Use the Dial Indicators to precisely align the cylinder
  • Sweep between the C zero and C 180 positions to check deviation

PERMALIGN EDGE CUTTING HEAD CALIBRATION

PART 5 OF 5: ALIGNING THE CENTER OF ROTATION OF THE EDGE ASSEMBLY

Your Cutting Head must be aligned and calibrated properly to ensure accuracy and repeatability for every cut. This 5-Part series details the instruments required for proper alignment and the steps to achieve calibration.

Part 5 of 5, Aligning the Center of Rotation of the EDGE Assembly:

  • Center the Head using the Dial Indicator setup
  • Position the C-Axis Motor with the Jacking Bolts
  • Properly tighten the Screws and verify tolerance

How can we help?